Almighty Technology Giant

"Because nanotechnology may have been developed in scientific research institutes and universities, not factories, but in the manufacturing industry, it is not necessary or possible for him to do research from basic materials science, publish a large number of papers, and do A lot of experiments to verify its concept, and finally came up with such a technology, the normal law is generally used directly after the purchase. ~~ щww ~ suimеng ~ lā "

"So in this process, you will find that for him, new knowledge creation is generated in different industries, and it is already outside the manufacturing system. For manufacturing itself, when he uses nano materials to When replacing the previous steel or other materials, the amount of knowledge it had previously known was lost and eliminated because it was useless and uncompetitive. "

"At this time, we will find that the introduction of emerging technologies into industrial manufacturing, from the perspective of knowledge, is that the amount of knowledge in the manufacturing industry is continuously shrinking, while the amount of knowledge in other emerging industries is constantly expanding. This is also an inevitable rule because Society is progressive, and this inevitably leads to further division of labor. "

"We are talking about such technological innovations. It must fundamentally increase the total amount of information from raw materials to consumers. This has been increasing. This core logic must be repeatedly emphasized."

"But we will find that in this increasing process, more and more shares are beginning to belong to the tertiary industry such as the service industry, or other emerging industries in the auxiliary manufacturing industry, so we see that the tertiary industry in the developed countries is in the national economy. Dominate. "

"And the market share of industrial manufacturing itself is shrinking. For example, an engineering technician and a teacher in traditional industry have a basic skill, which is that they have to draw drawings. The last generation of technical workers should have drawn them when they learned mechanical drawing. Then you have to have a drawing board. It is necessary to draw mechanical parts or even the entire machine in perspective. This thing is quite time-consuming and labor-intensive. This is the manifestation of knowledge. This is the information and important skills you have. Who's in the hands? Skilled workers, factories. "

"But with the rise of computers, CAD has emerged, that is, computer-aided design systems have emerged, and electronics industry software has risen."

"You will find that emerging industries and new technologies have transferred a lot of the knowledge owned by these traditional technicians. These technicians are naturally unemployed, and the transferred knowledge has become computer-standard auxiliary graphics. All This kind of basic module, you only need to buy a software company, such as Microsoft products, call it and it's done, so software companies such as Microsoft Corporation, Oracle Corporation should smash a lot of technical engineers' jobs. "

At this moment, Ye Hua was talking openly on the stage, and everyone on the court actually listened to it, even the big men nodded from time to time.

No wonder that more than 100,000 people have come to this conference to attend this high-level forum exchange conference, which can absorb a lot of the best knowledge. There is no doubt that smart people will absorb a little more.

When Ye Hua talked about this, he broadcasted the conference director's live broadcast and gave the main shot to Bill Gates, who brought a translator and couldn't help laughing. Although Gates was no longer in charge of Microsoft, His shares in Microsoft are all under 5, but everyone knows that Microsoft Technology's spiritual leader is Bill Gates.

At this time, Ye Hua on the stage continued:

"... In the process of production design, such as digital modeling and simulation, to a great extent, this engineering technology and its original reserve of knowledge were eventually transferred to the emerging industry of the software industry."

"Then in the production process, the experience of masters was used to control production processes and standards. Now computer-controlled automated production lines have emerged. Massive programming and precise control parameters are concentrated on sensors, embedded operating systems, etc. A series of production tools and equipment are controlled by industrial software, so the kind of knowledge and experience of the master about factories, industries, and manufacturing industries has been replaced by industrial software. "

"The owner of the factory will not need a master, but will buy a computer and hire a programmer."

"Another example is traditional market sales, which used to rely on the relationship between people to approve goods. I notified my customer to let him pick up and purchase. Now, it has been replaced by e-commerce. Under the Internet c2c mode The transaction can be completed, and all consumer information is captured, so big data is emerging! "

"Then obviously it is countless times more powerful than you relying on human labor, and the cost is cheaper. The most important thing is that you have mastered the big data of information. This may be the most valuable wealth. It is more valuable than the products you trade. This is exactly the case, otherwise why are you trying to build a data center now? "

"So in traditional industry and manufacturing, a large amount of this knowledge is actually replaced by this kind of knowledge in emerging industries, but the total amount of knowledge is exponentially increasing, so our society is constantly improving, and technology is constantly improving. development of."

"This leads to a basic law. The amount of knowledge in the manufacturing industry is constantly flowing. If we believe in some extreme examples of science fiction movies, fully automated unmanned factories, there is no one in them. These Everything in the factory depends on automated production, and sensors, computers, and industrial robots complete all production activities. "

"In this case, the knowledge of traditional industrial manufacturing, then all 100 have been evacuated, and all have been transferred to other industries."

"So I personally boldly predict that the more the manufacturing industry develops in the future, the more developed and powerful it will become, and the more supporting industries it needs, or the majority of them will be in the tertiary industry, it will be more and more The larger the number of people employed in the tertiary industry, the more the number of employees in the manufacturing industry will continue to decline and be transferred. "

"In fact, this law has appeared in any country now, and it is a very obvious trend. That is, the proportion of the manufacturing industry in the entire economy, it is constantly declining. This is a major trend and a major trend. . "

"So when everyone is talking about the U.S. demand for manufacturing repatriation, what is the main purpose and motivation of the repatriation? We all know that it is to create new jobs in the United States."

"So I think that this way of positioning the United States will go awry, and it will be more serious. The traditional position will inevitably be lost because it will not be competitive in the future, so you cannot stop this. This is a big trend, neither can the United States, nor can anyone. "

As soon as the words came out, he thundered, was strong, and justified. The live broadcast shot gave a lot of American technocrats, many of them nodded silently, and gave several American politicians present, all of them expressionless.

Ye Hua's saying "to go astray" is actually very euphemistic. To put it bluntly, you old lady, you have taken a path that is doomed to fail.

On the stage, Ye Hua paused for a moment, looked around the audience and licked his lips and moisturized, then said:

"So, I think this is also an inspiration for people from all walks of life in our country and in society. That is, what kind of employment will be a promising and competitive job in the future?"

"It must not be to protect those production line positions in the traditional industrial manufacturing industry, but to create new jobs. The main purpose of such jobs is to continuously empty the knowledge of traditional manufacturing. This is the most promising job in the future. . "

"In such a new job, in the process you will find that its general trend is to make the manufacturing industry fool. Of course, I know that everyone is talking about intelligent manufacturing. The manufacturing industry is getting smarter, but you say it is becoming more and more stupid. It ’s still at such a conference, do n’t you come here to tear down ... ”

Ye Hua smiled and laughed. The scene was also greeted with laughter. The scene that had been carefully listened to became more relaxed and the atmosphere was a lot more active.

After the episode, Ye Hua continued to say: "I think we need to look at it from a different angle. Intelligent manufacturing is standing inside and looking at industrial manufacturing from within the industrial system, and you will find how intelligent it becomes. It is so complicated. But I think it is more important to look at it from the perspective of users and stand outside the industrial system. Under this new perspective, we will find that manufacturing has always become more and more silly and simpler. "

"Take a point-and-shoot camera more than 20 years ago as an example ~ www.wuxiaspot.com ~ Everyone thinks point-and-shoot cameras feel that the camera is stupid. Actually, it is not a camera stupid. It is a camera that fools can use. Before, you had to take pictures. I ’ll look at the aperture, consider the weather, and adjust the shutter before I can take a picture. "

"This requires users to have a lot of professional knowledge, and the requirements on users will be very high. If you don't have this expertise, you can't take pictures."

"But with the advent of point-and-shoot cameras, it extracts this amount of knowledge and transfers it to it. It automatically adjusts the aperture, shutter, etc. for you. Users only need to press one button, and a beautiful photo comes out."

"So silly is relative to the user, it is convenient, the more convenient things are more convenient for the user."

"Furthermore, the phc of our coastline company also has the same purpose. From the perspective of the industrial system, the semiconductor industry is very complicated, and the software industry is also very complicated. But outside of this system, from the perspective of users, phc It's more stupid than a PC. Users only need to do it to play. If they don't understand, then go directly to the artificial intelligence assistant 'Xiao Yin' and tell her what you want to do. "

"So, isn't that true for manufacturing too?"