Escape The Solar System With Millennium Technology

Chapter 83 – 82nd Magnetic Energy Deflecting Shield, Small Electromagnetic Weapon, and Protein Bulletproof

“Why are there so many robots?” Wang Lei asked in surprise.

“The blockade was lifted four days ago, and all the previously seized materials were delivered.”

“After observing the owner’s physical condition, the existing robots are not enough to complete the construction of the laboratory before the owner is discharged, so I built another 200 steel pipe robots.” Said Sunday.

“If you want to build a large number of robots in the future, you must notify me in advance, do you know?”

“Yes, master!”

“If there is no accident, I will be discharged tomorrow. Can the construction speed be accelerated, as long as it can be used.” Wang Lei asked.

“Please wait, it is calculating!” 2 minutes later.

“Suspending the exterior decoration of the floor and the interior and part of the facilities can save a day.” answered Sunday.

“Alright! Then do it, try to complete it as soon as possible while ensuring the quality.”

“Yes! Master.”

After understanding the construction progress of the laboratory, Wang Lei called for Nuo Wanting to display the technical information of the magnetic deflector shield, small electromagnetic weapons, and protein body armor. Wang Lei wanted to get familiar with it in advance.

The magnetic energy shield can generate a prototype magnetic field with a diameter of two meters around the device, deflecting the direction of the incoming metal projectile.

But this layer of magnetic field does not always exist. In the standby state, a weak magnetic field of 4 meters will be generated around. When a metal object reaching a certain speed passes through this layer of weak magnetic field, the device will activate a radius of two. The strong magnetic field of meters, two seconds after the metal object leaves the strong magnetic field, the strong magnetic field will be turned off to save energy.

The energy source of the magnetic field shield is a graphene battery, which can provide the magnetic energy shield to resist the shooting of 4 rounds of heavy anti-material sniper rifles.

After looking at the graphene battery equipped with the magnetic energy shield, Wang Lei found that the graphene battery equipped with the magnetic energy shield has a much larger capacity than the battery currently produced by Wang Lei, which is more than twice the current capacity.

But after seeing the materials needed, Wang Lei’s excitement immediately calmed down, because the materials he used were all very expensive and rare materials, and the manufacturing process was much more complicated than that of ordinary graphene batteries.

After reading it, Wang Lei couldn’t help but sigh, “This is the performance built with money!”

And this is not the most difficult part of the magnetic energy shield. The most difficult part is the production of the magnetic field transmitter. If you want to form a direct two-meter strong magnetic field within 0.001 seconds, you need to withstand super-strong voltage and current, as well as the generated Of huge heat.(Read more @ wuxiax.com)

Therefore, the material used in the magnetic field generator is a normal temperature superconductor material, and this normal temperature superconductor material is a brand-new synthetic material, and the synthesis steps are also very cumbersome and expensive.

Small electromagnetic weapons are much cheaper and simpler.

The material of the barrel is a high-strength tungsten carbide alloy, and the material of the coil is an ordinary graphene wire, and the energy source is also an ordinary graphene battery.

The most special one is the ammunition for small electromagnetic weapons. Because it is electromagnetic propulsion, the ammunition for small electromagnetic weapons has only one warhead, no propellant, or primer.

Because the speed of the warhead is 7 times the speed of sound when it is launched, the warhead is not in contact with the barrel in the barrel, and is completely fixed in the middle of the barrel by the magnetic field.

Therefore, there is no rifling inside the barrel, and if there is no rifling, the warhead will not rotate, and the stability of the warhead that will not rotate will deteriorate.

Therefore, the surface of the warhead of the small electromagnetic weapon has three curved grooves, and the warhead is rotated by the air resistance during high-speed movement.

Because the ammunition has only the warhead part, the ammunition capacity of small electromagnetic weapons is much larger than that of ordinary gunpowder weapons, reaching 50 rounds. This is still the capacity of ordinary magazines. If it is an expanded magazine, it can reach 100 rounds. Ammunition capacity.

Small electromagnetic weapons have two batteries, one in the gun body and the other in the magazine.

The battery in the gun body mainly supplies power for the electronic components inside the gun body, and the battery in the magazine mainly provides electricity for the launch of ammunition.

Because the ammunition power of electromagnetic weapons is completely determined by the speed at the time of launch, all electromagnetic weapons can adjust the speed of ammunition.

The higher the power, the slower the rate of fire, on the contrary, the faster the rate of fire, the lower the power.

According to different gun types, the power of the line is different. Wang Lei saw a real anti-tank electromagnetic sniper rifle from the data, but in Wang Lei’s view, this can no longer be described as a gun, it should be called a gun.

This anti-tank electromagnetic sniper gun needs to wear a heavy exoskeleton to be used. Its caliber reaches 25.7 mm. The body is a slender needle. The material of the ammunition is heavy cemented carbide, an alloy comparable to the hardness of depleted uranium bombs.

The maximum muzzle velocity can reach 20 times the speed of sound. For this reason, the surface of the ammunition is also coated with a layer of high temperature resistant coating to avoid evaporating itself before hitting the target.

And if you want to launch at 20 times the speed of sound, you need a whole graphene battery to power it.

Therefore, its magazines are all loaded with one shot, and the rest of the space is used to install the battery.

And Wang Lei also saw a modified version of this sniper gun at the end. The modified version is to connect the energy of the exoskeleton to the gun body, so that the speed of the ammunition can reach 30 times the speed of sound.

For this reason, the range of this sniper gun is only 5 kilometers. At a distance, the warhead will evaporate directly because it is not protected by high-temperature coatings, just like a meteor.

And the service life of this gun is very short, it can only fire 100 rounds, after which the barrel and coil need to be replaced.

Wang Lei felt that this improved electromagnetic sniper gun was only for emergency use.

After asking Nuo Wanting, Wang Lei’s speculation was confirmed. After the Freedom Alliance produced a new material that can withstand 20 times the speed of sound, this modified model appeared in an emergency.

After learning about small electromagnetic weapons, Wang Lei looked at the last one, the protein body armor.

In fact, it is not very accurate to call it a protein body armor, because it should actually be called a biological body armor, which is the prototype of biological armor.

The reason why it is called protein body armor is because its main ingredient is a kind of biological protein, which is a mixture of genes from lizard and Pippi shrimp, which can be regarded as a kind of gene editing technology.

The general process is to extract a section of lizard genes and Pippi shrimp genes, and then extract gene fragments related to regeneration and protein production from the lizard genes. The same is true for Pippi shrimp, which extracts muscle protein. Gene.

Mix these three genes together, then implant them into the fertilized eggs of lizards, and then use artificial uterus to breed them.