Fake Extinction of All Mankind, and I Rebuild Civilization with my Bare Hands was Broadcast Live

【Fuck!!】

【It's started, it's started!】

【I get it! Lord Kui is going to build a Noah’s Ark this time to resist the flood!!】

【Noah's Ark? Stop teasing!】

【Brothers, so many ores? It must be a big project!!】

【Looking forward! Lord Kui yyds!!】

soon.

When people are talking.

The third batch of ore in the kiln.

It's finally out!

at this time.

Below the entire furnace.

It's already piled high with assorted charcoal and oxides.

But these are far from enough!

then.

Jiang Kui continued to fill and seal the kiln.

Start firing the fourth batch!

Fifth batch!

The sixth batch!

soon.

It took nearly three hours.

The hill-like ore in the camp was all refined!

present.

Look again in front of the furnace tunnel of the Ascension kiln.

It's already piled up with a large sheet of burnt oxide.

Reef and Charcoal!

Ore separation is complete.

While waiting to cool down.

Jiang Kui was lying on the ground with his back on his back!

Breathing heavily!

no way.

Even if I've been single for twenty years, I'm fast.

Super unicorn arm bonus!

The frequent blasts are also exhausting for him!

Three 19 hours down.

The blades in the air duct of the blower are almost out of sparks!

Replaced five or six times!

The audience was stunned.

Call this tm a real man!

soon.

It took about an hour or so before and after.

Jiang Kui ate something casually.

Then fetched one of the largest clay pots in the camp.

Put the water pipe inside the reservoir again.

Pulled to the front of the furnace.

Turn on the tap.

He cleaned up a lot of debris on the ground.

After rinsing.

Metal and stone.

It's easy to tell the difference!

see.

He hurriedly picked up the fire stick.

Start collecting.

Remove the burnt copper particles and metal tin residues.

All in clay pots.

good guy's!

I got a whole can of it!

With these base metals.

The rest is easy!

at this time.

It's getting late.

Light rain on the island.

patter.

To get homework done faster.

Jiang Kui got two oil lamps directly.

put in the shed.

Get ready for a night battle!

Due to the lack of two lights on the right.

to prevent intrusion.

I can only trouble Dabai to squat and guard!

"Dabai! Be alert!

See the master's gesture.

Dabai immediately understood.

Fei also ran into the jungle.

Don't delay for a moment!

More obedient than a professional police dog!

The audience was amazed:

【Fuck! Da Bai is getting more and more obedient! 】

【Real master of domestication! Train wolves to be obedient!】

【Da Bai is so pitiful, he went to stand guard again! 】

[Haha! Hazi: I hope I won't meet this man in my next life! 】

【Brothers!! I have a bold idea, I also want to raise a wolf... 】

【Brother! You don’t just raise things casually...】

Open the big white.

Jiang Kui sat on the ground.

Start making clay molds for saw blades and chisels!

Making a shark tooth frame saw is very simple.

The only difficulty is the saw blade!

A sharp chisel is required.

on a metal bar.

Scratch the serrations!

this process.

Quite complicated!

You need to burn one end of the whole saw ruler first.

Then use a chisel.

Little by little on the edge of the red hot spot.

Type out the word "people".

Two "herringbone".

It's a "sawtooth"

.

so repeatedly.

from start to finish.

Continuously annealing.

Keep pounding!

in the process.

Just a mistake.

Break even a shark tooth.

The whole saw blade is useless...

By the time.

I want to weld the sawtooth up again.

But it's hard!

With current technology, it is simply impossible to complete...

so.

When hammering the sawtooth.

The hand must be steady.

Second.

The chisel must also be sharp!

at last.

when annealing.

Control the temperature too!

Three conditions!

Wherever there is one dissatisfaction.

All efforts will be lost!

therefore.

Even when casting molds with copper water.

Jiang Kui was extra careful.

Don't dare to be slighted in the slightest.

soon.

Cooled and re-quenched!

Blanks for saw blades and chisels.

It's finally out!

Said to be embryos.

But in fact.

It is two pieces of alloy copper, one long and one short.

50 cm long.

The thickness is about 4mm.

Shaped like a meter!

short.

It is a copper alloy metal rod that can be held in one hand.

The whole is round.

But there is a flat edge underneath.

When.

Just grab any piece of quartz.

to be polished.

It turns into a very sharp woodworking chisel!

in the live room.

see here.

The audience is still in a fog.

I have no idea what Jiang Kui is going to do.

Is it some kind of tool?

When everyone is talking.

the other side.

Jiang Kui has found the whetstone.

Take a chisel.

Put the edge on it and sharpen it quickly!

"Shhhh--! 35

soon.

Polished.

Even the body is still pitch black.

But at the edge.

But it has already been refurbished.

getting sharper!

under the oil lamp.

Shining bright white light!

Immediately after.

After the chisel is polished.

Jiang Kui put the saw blade on a slate.

The left hand holds the chisel.

Press the cutting edge against the designated position of the saw blade.

Right hand holds an axe.

Knock lightly!

"Ding!"

The sound of metal crashing came.

Look again.

There is an obvious blade mark on the saw blade!

The sharpness is not bad!

【Fuck! Is this a chisel?】

【Master Kui is ironing?】

【666, Chisel!!】

【Amazing! It's okay to strike iron! 】

but.

It's not too bad.

The chisel has to be quenched three times later.

Increase the hardness!

Then sand it clean.

In order to be better able to do the work of the teeth!

If not.

Most likely not a few hits.

There will be unfinished teeth.

The embarrassment that the chisel has been scrapped!

If so.

723 waste of material is second.

Most importantly, a waste of time...

Soon.

After three times of quenching and grinding, the chisel was finally released.

And next.

It's just hitting the saw blade.

thinking.

Jiang Kui put the quartz plate in front of him.

Then he immediately inserted the saw blade into the bonfire beside him.

until red hot.

Just take it out and put it on the slate workbench!

Quartz plates are very hard.

Don't worry about breaking it.

Even broken.

Just do one more piece.

There's a lot of this stuff in the camp!

everything's ready.

Jiang Kui placed the chisel on the edge of the saw blade.

Then tap lightly.

"Ding!

next second!

sharp chisel.

Immediately on the edge of the saw blade.

Knocked out the one-character "swipe"!

follow closely.

Do the same thing.

Another "squeeze"!

then.

Red hot again.

Skim again.

Another slap!

Repeatedly repeating this.

【The rhythm of Mr. Kui's ironwork is really invincible!】

【The most hilarious DJ dance song in history: Kui Ye strikes iron!】

【The most beautiful music comes from labor!】

[I followed the rhythm of Lord Kui and actually farted twice. The most important thing is that there is no sense of disobedience? 】

[**]

Soon!

Original complete saw blade.

After careful thumping.

Soon a row of very neat shark teeth appeared!

through the lens.

Take a closer look.

Rolling hills.

Sharp and sharp!

Really like shark teeth!

(Fourth more, sincerely ask for votes!).

(This chapter contains pictures, click the "Illustration" button in the lower right corner of the screen to view the pictures.)