Fake Extinction of All Mankind, and I Rebuild Civilization with my Bare Hands was Broadcast Live

Tenon and mortise.

Strictly fit!

Can't find any bugs!

It is not an exaggeration to say that it is stronger than screws!

A series of tight straight tenons.

Jump in front of the live camera one after another.

Like a beautiful piece of art!

The audience was amazed!

If you want to disassemble.

Unless with the help of tools and force majeure.

Otherwise it is simply impossible to separate it from the chassis!

have to say.

This wooden structure.

Really amazing!

soon.

When the bearing is integrated with the chassis.

Jiang Kui picked up the frame saw.

at both ends of the bearing.

made an "article"

Roughly calculate the diameter of the hub.

Carved a wooden slot.

and use a knife.

Clean both ends.

And next.

With bearings.

After that is to make the wheels of wooden cows and horses!

Wheels are hard to say.

But it is not easy to say.

Because in order to make the wheels stronger and more durable.

It is not possible to directly intercept the ready-made whole log.

Dig out the hub from it.

This is the dumbest.

It's the best way to make it!

Because of the solid wood wheels.

The volume is too large.

The requirements for materials are also strict.

Quite bulky!

Not surprisingly.

After getting into the car.

The wheels must be heavier than the warehouse!

Second.

730 even if it is really feasible.

It is also necessary to find trees that fit the diameter.

The large-diameter Banyan Island is not without it.

But really to make wheels.

Just go for it.

It is really unwise!

Tired and unpleasant.

so.

For wheels.

Jiang Kui decided to use mortise and tenon to do it!

According to the knowledge given by the system.

Jiang Kui learned.

The structure of the wheel of a wooden cow and a horse.

It is roughly composed of three parts: rim, hub and spoke.

The rim is the outer circle of the wheel.

Similar to current tires.

The hub is the log in the center of the wheel.

Act as a fixed support.

The spokes are the sticks that connect the wheel rim to the hub.

Make up your mind.

first step.

Jiang Kui decided to make the wheels first!

Then consider the spokes and outer circles!

"Dabai! That! Give it to me!

Follow the direction of Jiang Kui's finger.

Dabai immediately guessed the master's idea!

Pick up a piece of parched oak that's in the distance.

He rushed towards Jiang Kui.

"And that one!"

"Bring that too! 55

Since training Dabai.

Some errand work.

Jiang Kui will let it complete.

You don't have to do it yourself at all.

Saved a lot of trouble. (bjfh)

That's the benefit of training a right-hand man.

【Excellent dude!】

【Da Bai is becoming more and more obedient!】

[Really cheating! A wolf was abruptly trained to become a dog? 】

【Da Bai: Won’t you come and get it yourself?】

[**]

One by one, he took the logs that Dabai brought.

Jiang Kui randomly selected a cylindrical log.

Still oak.

Hard yet flexible!

Wheels are fairly simple to make.

After finding the right wood.

Jiang Kui put it on the woodworking table.

Use ink lines to draw lines, and rulers to make circles.

First mark the general shape of the hub.

Then there is the grinding.

As it stands now.

The production of the entire wheel hub.

Although ostensibly it is making wood.

But in fact.

This is pure fitter work!

A high level of skill is required!

You can only control the roundness of the entire wheel hub by feel!

No decades of skill.

It can't be done at all.

but.

Thanks to the assistance of [Master Craftsman].

This process is not difficult for Jiang Kui.

Just for a while.

Through careful cutting and polishing.

A cylindrical hub with a hollow inside is ready.

then.

After grinding.

Jiang Kui uses ink lines again.

Measure the circumference of the hub.

Pop a few intersecting lines on it!

Then it's a straight line.

Punch holes on the slope of the hub in turn.

These sockets are used to mount the spokes.

but.

Fabrication and installation of spokes.

Not so easy.

It must be ensured that the length of each spoke is substantially the same.

Otherwise the wheels are not round...

at the moment.

There is no mechanical machine tool in hand to assist processing.

For Jiang Kui.

It's really difficult.

Machining is fine.

Nothing more than mass production.

But if it is purely handmade.

For the technical level requirements, it is very high!

Why did carpentry apprentices in ancient times take more than ten years, or even twenty years to become a teacher?

The reason is here.

It's all handmade!

However, once you leave the school.

This skill is enough to last a lifetime.

The method of ensuring the same length of the spokes.

Need to use ink fountain to achieve!

First, use the ink line to pop two straight lines on a whole log.

Make sure the length is the same.

Subsequently.

in a straight line.

Pop up the vertical bar!

After making the outline of the spokes.

Use the frame saw little by little.

Break the plank into countless small sticks.

And these sticks of equal length.

It's the spokes.

Polished.

Make tenons on both ends.

Jiang Kui inserted them into the wooden holes of the hub one at a time.

Shaped like an umbrella bone!

then.

After finishing the spokes.

All that's left is the rims.

That is, the wooden tire of the wheel!

With hubs and spokes of equal length.

The rims are relatively simple to make.

As long as the line is accurate enough.

No problem at all!

soon.

Find some planks.

Jiang Kui used ink lines and a ruler to draw countless semi-circular crescent-shaped trapezoids on it!

Then use a shark tooth saw to unravel each half circle from it.

Straight mortise and tenon at the head and tail.

Mouth pierced inside!

One by one, they are inserted into the tenons of the spokes.

Place each rim.

End to end to form a circle!

Soon.

A wheel with a very high degree of regularity is ready!

see.

Jiang Kui picked up the wheel.

Take a rough look.

Then immediately stood up.

Put the wheel on the ground.

Roll out carefully!

Um!

not bad!

Because it is all tenon and tenon structure.

Plus well polished!

The trajectory of the wheel.

It's perfect!

【Fuck!!!!】

【Master Kui made a wheel???】

【Hot Wheels!!!!】

【Wheel? f*ck!! Too strong!!!】

【Brothers! I seem to know what Master Kui is doing! He is not building cars!!】

[It's really a car! But it looks like a trolley? Isn't the one just made just the chassis and bearings?! 】

Eagle Sauce Audience:

[It's outrageous... This guy made a wheel out of only wood! Unbelievable! 】

East Win Audience:

【The whole tenon-and-mortise structure is a real fork!】

White Bear Audience:

[Everything about China is so mysterious! It's so fascinating! If I wasn't watching it, I wouldn't believe it, just using these things to make a wheel!!]

Immediately after.

Follow the above method.

Jiang Kui also made another wheel.

but.

It's not over yet.

The island is almost all mountain roads.

Wooden wheels are still too fragile!

Can't stand the bump at all!

So, you have to find a way to get it a tire and reduce the wear of the wooden wheels!

(One more, ask for votes.)

(This chapter contains pictures, click the "Illustration" button in the lower right corner of the screen to view the pictures.)