Fake Extinction of All Mankind, and I Rebuild Civilization with my Bare Hands was Broadcast Live

There is a grinder.

Next.

As long as it is on the joint surface of the upper and lower grinding discs.

Grinding teeth and grooves are carved.

then.

Then on the side of the upper stone grinding disc.

Take out a cave.

Use wooden sticks as handrails.

Then assemble it together.

A simple primitive stone mill.

Basically even alive!

but.

It's easier said than done.

It's not that easy to do.

From the beginning of the morning to now.

Jiang Kui has basically never been idle.

All the time ~ holding hammer and chisel.

Ding ding ding dong is busy!

in the live room.

See Jiang Kui has been sitting on the ground.

The two big stones were fiddled with without saying a word.

The audience became more and more confused.

Confused.

Don't know what this guy is doing?

【If you don’t understand, ask, what are these two big stone wheels used for?】

【do not know!】

【wheel?】

[Stone Wheel? Your brain is really big, my friend! 】

[How could it be a wheel! At least these two stones have a few hundred pounds!]

[It feels like a few hundred pounds. If it is really a wheel, only an armored vehicle can match it...]

【Ha ha!】

Stone grind this primitive grinding tool.

If it's on earth, it's really nothing unusual.

until now.

They can still be seen in some small workshops in the countryside!

But here.

As early as hundreds of BC, stone grinding has been replaced by the hydrodynamic mechanical grinding tools invented by the Chinese!

to this day.

In today's technology-oriented society.

More advanced artificial intelligence.

Electric-powered grinding machines were replaced as early as the first half of the 20th century!

Tools like the original stone grinder.

Forget about young people.

It's something that some elderly people have rarely seen!

That's why.

See what Jiang Kui does now.

The audience will not know why.

I can't figure out what he's going to do for a while...

Soon.

Chisel the upper and lower grinding discs.

After a while.

Jiang Kui picked up the hammer and chisel again.

respectively on the contact surfaces of the two grinding discs

That is, the edge of the grinding ring surface.

Densely chiseled, neatly arranged grinding teeth!

The fineness of grain grinding.

one.

It depends on the weight of the upper stone disc.

Second.

It is also the most important, it all depends on whether the grinding teeth on the edge of the grinding disc are sharp and dense!

most of the time.

Even if the stone grinder is heavy enough.

Can fully squeeze the food.

But if you grind your teeth and pull your hips.

The grind will still be very rough.

Even more bran is brought out.

affect the taste.

so.

The creation of the grinding teeth is also a crucial step.

The more densely engraved.

Grind more finely!

soon.

Another hour or so passed.

After some careful chiseling!

Grinding teeth.

Dotted.

bumpy.

And here.

Manufacture on a grinding disc.

It's basically over.

The next step is to dig a channel for the passage of food.

The manufacture of the bore is simple.

Find the center first.

Then use the chisel to drill in little by little.

Repair a pipeline.

Thoroughly penetrate the upper and lower sides of the grinding disc!

Production of the bore.

It's not a technical job.

As long as the method is skilled enough.

Chisel to make sure each hammer is just right.

Even if it's crooked.

The problem is not too big.

It doesn't have to be a tight fit at all.

Because it is in the middle of the grinding disc, after chiseling out of the bore.

The upper and lower grinding discs are directly opposite to the middle part with the bore.

It is necessary to leave a certain gap.

And only so.

When the upper stone grinding disc is rotating, the material can be driven along the bore into the grinding ring surface on the edge!

It is more conducive to grinding teeth to play a role.

but.

In the end.

It's a stone mill after all.

Even if the teeth are sharpened.

After long-term use, the contact surface of the two grinding discs will definitely be worn.

The distance between the middle portions causing the upper and lower grinding discs to have grooves is reduced.

The anti-grinding annulus of the edge makes it impossible for the material to pass through the bore.

so.

Every once in a while, the stone mill needs to be reconditioned.

Cut the middle part of the grinding disc to a certain thickness.

Re-grind the bore to a certain depth.

Restore the original distance between the upper and lower grinding discs.

can be reused.

but.

This is something.

There are upper and lower grinding discs.

Grinding teeth and bores.

Also all finished.

The next step is to create the navel.

Grinding umbilicals generally uses iron shafts.

And there happened to be some scraps of copper smelting in the camp!

Build the grinder.

Jiang Kui collected the waste immediately.

at the same time.

Make the corresponding mold.

Ask for flowers•

Then immediately open the kiln.

Refine waste into copper water.

Then cast in the mold.

As such.

A relatively regular iron shaft was obtained!

The role of umbilical grinding.

It is used to connect two grinding discs.

The purpose is to prevent the upper fan grinding disc from falling off and hitting people and animals when it rotates.

With grinding navel.

Jiang Kui picked up the chisel again.

On the side on the upper stone grinder.

A cave was excavated about 30 cm deep.

Find a suitable stick and stick it in.

Act as a handrail!

after.

In order to make the grinding disc more stable.

He also found Roman bricks and built a platform for the stone mill.

then.

Take the stick again.

Use the lever principle to lift the lower fan grinding disc to the platform and put it away.

Followed.

Use the same method to return the upper stone grinding disc.

.00

As such.

A standard stone mill with a diameter of about three feet six inches appeared in front of the audience!

【what is this?】

【I do not know?】

【Can you recognize this formation?】

【I thought I could keep up with the rhythm of Lord Kui, but the truth was the same! 】

【I don’t know what this is for, but it looks amazing!】

【Agree!】

here.

Assemble the two discs.

The wheat is also almost dry.

see.

Jiang Kui brought the tub to the stone mill.

A lot of fresh grains of wheat were poured down the channel.

Then he pushed the armrest.

Grind it round and round!

Grinding is heavy.

Every lap is exhausting.

Thanks also to Jiang Kui.

If replaced by another person.

You might not even be able to push it!

"Squeaky-!"

The sound of grinding teeth.

It is clearly audible in the live broadcast room.

And as the grind deepens!

Countless powders and bran also began to fall from around the grinding disc.

Gather on the outer edge of the platform!

soon.

After a few more laps.

The first mill of wheat is finished.

Now look at the platform.

amount of flour.

Already quite impressive!

In order to allow the audience to see more clearly.

At this moment.

The director in the studio also zoomed in on the camera.

Gave the flour a closeup!

result.

The audience just glanced at it.

The entire live room exploded on the spot!

Countless barrages.

Came in in an instant!

(Three shifts, ask for votes!) Righteousness.