Fake Extinction of All Mankind, and I Rebuild Civilization with my Bare Hands was Broadcast Live

Wear and bucket in the bucket structure.

in the depth direction.

Similar to the golden pillars and eaves pillars of the northern official buildings.

And the horizontal Fang.

It is similar to the beams in official buildings!

The shape is not very different.

But the uses are very different!

Two completely different building components!

here.

Use the fastest speed.

Assemble all kinds of wear and fight!

Jiang Kui immediately climbed the triangular ladder.

Pull the lifting rope.

Transport the various components in turn to the underlying frame of the house!

After sorting out the ideas, I installed it step by step!

The components of the dormitory frame.

The main components are pillars, wear imitations, bucket imitations, rafters, and purlins!

but.

Because the material of the bucket frame is smaller and denser than that of the lifting beam frame.

Generally, the diameter of the column is only less than thirty or forty centimeters.

That's why.

when making.

Jiang Kui deliberately wears the fake section.

Made into a tall and narrow shape!

The aspect ratio of each thread.

About two to one to three to one.

Twenty centimeters high.

About five to ten centimeters wide!

Soon.

In the given position, a wearer is installed first.

Jiang Kui picked up the bucket again!

The forehead of the bucket and the beam-lifting frame is the same.

Also called "falling eaves.

The whole column has upper buckets.

Under the bucket.

Fight against Guazhu.

It differs from the beam-lifting imitations only in that they all pass through the columns.

Fight into a roof truss!

The rafters are located in the lower layers of the epithelium of the rafters.

Like a vertical keel.

Together with Doufang, it plays the role of pulling and connecting the bucket racks.

Make the bucket rack more stable vertically!

Because Jiang Kui built a building.

When placing Dou Fang.

The rafters also double as joists!

It is not impossible to lay the floor directly on it.

Use as a bed or storage.

It is also the first choice for storage.

After all, space is limited.

Use or use more!

but.

Anyway.

The bucket-type piercing and bucket-type building materials and the wide-opening and closing beam-lifting building materials.

in space utilization.

There is still a big difference!

There are gains and losses.

Since we want to ensure stability.

There are definitely some sacrifices to be made in space!

soon.

Two piercing fangs fighting fangs.

After being installed in the established location.

Jiang Kui continues to work hard!

Because the wear imitation does not bear weight.

The end of the project.

The most critical four main beams.

It's floating!

It only plays the role of linking each column to improve the stability.

Second.

Wear Fang connection.

Also very complicated.

There are all the pillars connected.

There are also those that only wear most or part of the pillars.

Wear imitation has several layers up and down.

the number of its use.

Depends on the size of the rack.

That is, the number of purlins or columns (including landing columns and melon columns, each column supports one purlin) depends on the number of columns.

In the vast majority of cases it is.

Three purlins and three columns are worn!

for example.

A piercing beam passes through the central column and both ends are inserted into the front and rear eaves columns.

Therefore, it is "passing" and "wearing" for the central column.

For the front and rear columns.

In fact, it can be regarded as an "insert imitation" between the contact columns!

also.

For every two purlins and two columns in the front and back, one wear is added!

That is, five purlins and five columns and two wears!

Seven purlins, seven columns and three wears!

Nine purlins and nine pillars and four wear!

Eleven purlins, eleven columns, five wears, etc.!

As far as this building by Jiang Kui is concerned.

Count before and after.

Nine purlins and nine pillars are worn.

is more appropriate.

It is also the most material-saving architecture.

but.

How to penetrate is only the first step of the architecture.

The arrangement of pillars and piers.

is the main event.

According to design drawings.

this building.

A total of five forms are required!

very complicated!

The first is a simple "thousand-column landing"

The "inserts" between the front and rear columns pass through the other columns in between.

The second is the use of floor-to-ceiling long columns and melon columns alternately.

The usage of imitation is the same as the first one.

but.

Because the melon pillars are all forked on the last piercing rod.

Therefore, the melon pillars increase in order from the cornice inward!

The usage of the third column and the melon column is the same as the second.

However, except for the insertion and penetration between the top and innermost two melon pillars, and the lower pillars forked by the melon pillars, the front and rear penetrations are adopted.

The rest of the piercings are interspersed with short fangs to the outer half,

It is in the form of one after another!

Second.

In order to reduce the column and freely arrange the purlin distance!

as early as the beginning of design.

Jiang Kui is about the underlying framework.

Necessary improvements have been made!

Add two sloping beams or fang wood on the top and bottom of the purlin of the bucket frame!

Make all the purlins.

All fall on the herringbone sloping beam rather than directly on the stigma!

It forms a roof truss similar to an inverted triangle!

Busy time.

An hour passed in the blink of an eye.

The roof truss's piercing and douging trusses have finally been installed!

soon.

After placing all the wear and fight!

To create more space!

Jiang Kui also boldly created a special bucket-type structure, a wooden arch!

Inspired by the Yi dwellings provided by the system!

Yi dwellings are mostly rectangular planes.

Surrounded by earth walls.

The hillside parts are mostly similar to the Han style bucket frame.

But the interior is to get more space.

They are very clever minus the inner column.

The horizontal arch wood is picked out from the front and rear eaves column layer by layer!

The ends of the arches on each layer are supported by the vertical columns that do not fall to the ground.

The same column bears the purlin!

As such.

The root melon pillars are penetrated by layers of arch wood.

Finally formed a very unique bucket structure!

Due to the overhangs of the front and rear eaves, they are lapped together to the outside of the ridge purlin.

The whole couch beam frame is in the form of an arch coupon!

Operate several times.

The second floor of the house.

It's really bigger!

Even if the roof is not built yet.

You can feel the difference!

In a blink of an eye.

Three more hours down!

throughout the live broadcast.

Jiang Kui showed a variety of highly difficult mortise and mortise arrangements!

The audience was stunned!

They all froze on the spot!

【Wocao! Cow batch!】

【Amazing! It's awesome!】

【This guy is definitely professional!】

【Struggling for a hundred days, I want to go to the History Department of Jiangnan University!】

【Please accept my knee!!!!】

【The well-deserved god of DIY!】

【Looking up to high-end players!!!】

that's it.

In the exclamations of the audience!

the ground floor of the house.

Finally finished!

Don't be too late!

The next thing is the old way.

Raise the main beam!

Use all kinds of mortise and tenon joints to enrich the wall!

Install the floor.

Get some paint on!

Work on the details!

And busy with it all.

It's evening time again!

but.

For rush work.

Jiang Kui didn't stop there!

But continue to burn the lights at night!

Construction of the final two-story roof begins!

Take into account the island's climate and rainfall.

The most practical roof.

It must be a chevron-shaped Phi (good for money) roof gable!

Easy to drain!

As for the inside of the roof.

It is still a bucket-type improvement method in the form of arch coupons!

Simplified arch.

After the front and rear eaves pillars are protruded inward by two layers.

It is still the same as using two herringbone oblique beams to connect at the ridge purlin!

Then.

All ridges are supported on inclined beams.

But there are also frameworks with smaller spans.

No need for an arch.

Just drop each vertical column directly on the horizontal beam!

specific situation.

detailed analysis!

soon.

Make up your mind.

Jiang Kui moved immediately!

Build the frame according to the drawing.

To match with purlins and rafters!

then.

Putting through Fang and Dou Fang!

Between roof trusses and under porch eaves.

Set up a vertical frame composed of vertical pulls.

To enhance the overall stability!

Follow this design idea and architecture process.

Inside the roof.

Soon to take shape!

in the light of fire.

Appeared unobstructed in front of the audience!

…lift…

(Second update, ask for votes!).