King of Industry

  Chapter 290 Horizontal Injection Molding Machine

  In the office of Rongguang Machinery Factory, a reminder from the monkey gave Zhao Guoyang an idea immediately.

   Glancing at the phone on the table, Zhao Guoyang stroked the growing beard on his chin and said, "This matter, sooner rather than later, I'll call Ning Xiaohong and talk to her."

   This proposal of Zhao Guoyang, monkey naturally agrees a hundred times.

"Yeah, Miss Xiaohong came here a few times a few days ago, and she said that she must call her back when you come back, the chairman. From what she said, it seems that she has something urgent to do with you!" Miao Si on the side Qi also interjected.

  Hearing this, Zhao Guoyang smiled at Miao Siqi, then picked up the phone and started calling Ning Xiaohong.

   Not long after, Ning Xiaohong's crisp and pleasant voice rang out from the other end of the phone.

   "Hello, Xiangyang Machinery Factory Technical Section, who are you?"

   "Xiaohong, it's mine, Zhao Guoyang!" Zhao Guoyang replied directly.

   "Huh? Guoyang, you are back? These days, Master and I look forward to your hair turning gray!" Ning Xiaohong seemed a little excited.

   "Ah? Is it so serious, then I'm guilty!" Zhao Guoyang couldn't help teasing after hearing the words.

   "Hi, I can't make it clear on the phone, let's talk in detail in person. Guoyang, where are you at the moment, can you come to our factory sometime?" Ning Xiaohong asked.

   Zhao Guoyang thought about it for a while, and there was nothing wrong with his Rongguang Machinery Factory for the time being, so he agreed.

   "Success, then it's settled! Guoyang, come here as soon as possible, and master and I will treat you to a good lunch at noon!" Ning Xiaohong said excitedly.

   Putting down the phone, he turned his head to look at Hou Zi and Miao Siqi, and explained to the two: "Ning Xiaohong, I guess there is something important to discuss with me, so I'll just go over there."

   "At the factory, with the two of you watching, basically I have nothing to worry about. In a word, I hope everyone will continue to work hard and strive to break through the six-figure monthly profit as soon as possible. I will send you a big red envelope!"

  Hearing Zhao Guoyang's encouragement, Monkey and Miao Siqi looked quite excited.

  Indeed, judging from the expansion of production scale and the development of the factory, the monthly profit at this stage has almost reached 30,000 to 40,000 yuan, and the monthly profit of 100,000 yuan is definitely something to look forward to.

   Zhao Guoyang chatted with the two of them for a while, then went out and got on the motorcycle, ready to leave.

  Before he left, he didn't forget to tell his uncle that the medicine for his aunt had arrived, and Xiaojing had already delivered it.

  He Guoping didn't know about the situation because he went out early in the morning. Hearing Zhao Guoyang's words at this time, his nose was sore and he almost shed tears.

  Seeing the pain on his uncle's face, Zhao Guoyang could only comfort him with kind words.

"Uncle, it's a good thing that my aunt's illness can be cured. It's not worth it for you to shed tears over this matter... When my aunt recovers from her illness, we will have a meal with He Meimei. The two of us, We haven't had fun together for several years."

  He Guoping nodded after hearing what his nephew said, "Yeah, what you said, Guoyang, is right. When your aunt is in good health, uncle will treat you to dinner, and I will definitely treat you to dinner!"

   "Well, I'll just wait for the good news, uncle, let's go!" Zhao Guoyang smiled and waved to He Guoping, started the motorcycle, and rumbled away.

  …

  When he came to Xiangyang Machinery Factory again, Zhao Guoyang saw that the sign at the factory entrance had changed.

  The eight bright red characters of "Xiangyang Machinery Co., Ltd." are engraved on the brand-new long signboard, which looks much more impressive than before.

  Although the brand of the factory has changed, the doorman is still an old man.

  Seeing Zhao Guoyang coming in with a motorcycle, the guard quickly raised the pole and let him go.

  Perhaps it was because the motorbike motor was roaring too loudly, which attracted people's attention. As soon as Zhao Guoyang entered the parking shed, Ning Xiaohong quickly came out from upstairs.

   "Guoyang, here!" Seeing Zhao Guoyang, Ning Xiaohong excitedly waved to him.

   After parking the car, when Zhao Guoyang followed Ning Xiaohong upstairs, he casually asked, "Xiaohong, what's going on, you're looking for me so urgently?"

  Ning Xiaohong hesitated for a while, and then said awkwardly: "Hey, it's not about the transformation of the factory."

   "After listening to your advice last time, Master started preparations immediately after the factory was restructured. However, the development of molds for plastic parts is really not that easy..."

  After hearing this, Zhao Guoyang nodded and said, "Well, of course."

   "The industry of molds for plastic parts is much more difficult than that of iron parts. Especially for the first time in your factory, it will naturally be more difficult in the initial stage. Tell me, did you encounter any difficulties in production?"

Ning Xiaohong shook her head, and said with some shame: "It's not a production problem. After our horizontal injection molding machine was purchased, I also designed a simple mold. However, we couldn't even install the mold. Done..."

  After hearing this, Zhao Guoyang immediately understood.

   Indeed, although the horizontal injection molding machine has many advantages, its disadvantages are also obvious.

  Especially the installation of the mold is very troublesome. In addition, the insert is like a mold, and it is easy to tilt or fall.

After thinking about this, Zhao Guoyang comforted: "Well, I can't blame you for this. Horizontal injection molding machines are indeed prone to such problems. Later, you can show me the mold you designed, and I will install it for you. have a look."

   "Ah, that would be great."

  Ning Xiaohong raised his head and smiled, "Let's go and tell Master the good news. You don't know, these days, he is so worried that he can't even eat."

  Thinking that such a tough veteran like Liao Jingsheng would sometimes be unable to eat, Zhao Guoyang couldn't help turning a strange color on the corner of his mouth.

   Following Ning Xiaohong into the factory director's office, Zhao Guoyang immediately saw Liao Jingsheng sitting there smoking a stuffy cigarette and sighing.

   Without waiting for Ning Xiaohong to greet, Zhao Guoyang shouted: "Director Liao!"

  Liao Jingsheng was taken aback. When he looked up and saw that it was Zhao Guoyang, his face showed surprise.

   "Ah! Guoyang, you... why are you here?" Liao Jingsheng stood up, a little hesitant to answer.

Ning Xiaohong next to her pursed her lips and said with a smile: "Master, just after Guoyang called, he was pulled over by me. The reason why I didn't tell you is to give you a surprise. How about it? surprise?"

   "You girl! You are so naughty!" Liao Jingsheng said dumbfounded.

  After being seated, Zhao Guoyang did not take pride in himself, and directly shared his understanding of molds with the two of them.

Referring to the problem that Ning Xiaohong told just now, Zhao Guoyang explained: "Director Liao, Xiaohong, in fact, mold installation has always been a link that mold factories pay more attention to. Hiring a professional molder with a high salary is a must.”

  "An excellent mold engineer can not only help you with mold installation and debugging, but also help you find some problems with the mold."

   "For example, those molds cannot be molded, which are unreasonable mold holes, etc. Sometimes, a reminder of this kind of talent can save you a lot of detours."

  After hearing this, Liao Jingsheng was deeply touched and said: "Yes, Guoyang, you can be said to have touched my heart."

"To tell you the truth, when our factory just decided to transform into plastic parts molds a few days ago, I thought about hiring a molder. However, I have traveled almost all the counties and districts below Guangling City. But they couldn’t even hire a senior molder.”

  After listening to Liao Jingsheng's complaints, Zhao Guoyang comforted him and said, "Director Liao, this situation is normal. The current industrial level of our Jiangnan Province, especially the Jiangbei area, is still a little behind."

"Let's talk about our Guangling City. There are only one or two mold factories with real strength. There may be only two or three excellent mold workers. In this case, if you want to recruit people, you must It is difficult."

Zhao Guoyang paused, and continued: "But there is no rush to poach people, take your time. For the time being, I can still find time to help you with ideas and help. Besides, Xiaohong is very smart and has a strong learning ability. , I think it won't be long before she can be alone."

  Liao Jingsheng was overjoyed when he heard the words, and said gratefully: "Great, with your words from Guoyang, the first step of our factory's transformation is very hopeful."

   "Xiaohong, let's study with Guoyang later. First of all, we have to place this mold for the learning."

   "Well, I know, Master! As long as Guoyang doesn't hold back, I will definitely be able to learn the same thing!" Ning Xiaohong blinked at Zhao Guoyang and said confidently.

   "Haha, you, you are just a character who refuses to suffer!" Liao Jingsheng said with a smile on his face.

   Zhao Guoyang was also a little helpless for Ning Xiaohong's run on.

   Seeing that it was getting late, he pointed to the outside and said, "In this case, then Director Liao and Xiao Hong, let's go to the workshop now and solve the problem!"

   "Okay, let's go down now!" Liao Jingsheng picked up his coat without hesitation, and went straight ahead to lead the way.

  Following Liao Jingsheng and Ning Xiaohong into the workshop, Zhao Guoyang saw a large horizontal injection molding machine in front of him.

  Seeing this brand new machine, Zhao Guoyang was stunned and said, "Well, it turns out that your factory bought this kind of injection molding machine."

   “This horizontal injection molding machine is indeed the most common type among injection molding machines. The mold clamping part and the injection part are on the same horizontal center line, and the mold opens horizontally, which is very convenient to use.”

   Ning Xiaohong said from the side: "Yes, when Master and I went to purchase this machine, we heard from the manufacturer that this injection molding machine is easy to operate and has high production efficiency."

   "It's just that after I designed a mold, I couldn't install it at all..." Ning Xiaohong brought the mold placed aside, and said in frustration.

  Looking at the somewhat worn mold in Ning Xiaohong's hand, Zhao Guoyang shook his head suddenly.

  (end of this chapter)