My Hi-tech Library

The big screen is divided into two interfaces, one shows the internal operation of the square device, and the other shows the interface of the industrial software, the three-dimensional dog model Tang Shaohong just drew.

The industrial software is in the state of data reading and is associated with the running square device.

Inside the device, countless tiny probes suddenly protruded, and they spewed micro-particle powder together, depicting its model along the phantom of the three-dimensional model.

"What is this doing!"

"Wow! What an amazing device, do you want to 'build' that model?"

"Is this a 3D printer?"

"That's right! It should be a 3D printer!"

……

Looking at the operating mode of the equipment, the audiences who were temporarily off the stage, and those watching the live broadcast on the screen were all guessing, and they probably understood something.

Two or three minutes later, the inside of the square device was drawn with tiny lines drawn by special powder to draw a network diagram of a three-dimensional model. The next moment, those tiny probes shrank back, and the micropores on the inner wall spit out a A pale silver powder filled the entire device.

The equipment was humming, however, it was not clear what was going on inside.

Tang Shaohong looked around the audience and explained with a smile: "What everyone sees now is that our company has launched a new product of the polymerization-nano 3D printer, which has three main components, the most critical closed printing cabin, nanomaterials Ingredient box, core data controller.”

"The upper and lower sides of the closed print cabin are equipped with magnetic field control panels, temperature controllers, wind direction controllers, micro-lasers, micro-spray tubes, plastic dosing tubes, etc. The functional control system forms a precise, complex, A system for polymerizing nanomaterials."

"Nano material ingredient box, which contains some new nano metal particle materials, which can be assembled with different materials according to the material requirements of printing accessories,..."

"The core data controller adopts a WI series motherboard, a micro N series biochip, ..., which can perform 670 million operations per second, realize accurate data reading, accurate printing and driving, and organize various functions of the equipment and control it accurately."

"The core data controller reads the 3D model in the industrial software, performs data processing, drives the printer to work,..."

……

Tang Shaohong introduced to the audience below the booth one by one the functional parameters of the 3D printing equipment and its working mode.

Following Tang Shaohong's introduction, the audience all showed a sudden realization.

"Ha! I guessed it right, it's really a 3D printer!"

"You can still 'print' like this! Can you succeed?"

"Amazing!"

"No! Can something printed like this be used?"

"How to control the polymerization accuracy of powder materials!"

"..."

The audience stared at the big screen, watched the structural changes inside the device, and were all looking forward to its printing results.

Inside the closed printing cabin, the dense nano-powder material, under the control of the magnetic field force and the strong wind, quickly condenses the structural network of the model, and a burst of high-temperature red light flashes away.

With a sound of "bass", the printing hatch opened on its own, and a silver metal dog appeared. Its structure and appearance were almost identical to the three-dimensional model design drawn by Tang Shaohong.

Tang Shaohong designed a three-dimensional model of a bulldog, which is highly similar to a real dog. His superb painting skills won warm applause from everyone.

Through this polymerization-nano 3D printer, a bulldog with silver light was printed, which is integrated and lifelike.

Tang Shaohong stepped forward, took out the bulldog model from the printing cabin, and showed it to everyone with both hands in his hands.

Tang Shaohong looked around the audience and introduced with a smile: "This is a finished model made by a polymer-nano 3D printer on-site. It uses nano-scale metal particle materials, and the error between its accuracy and design drawings can be controlled within 50 nanometers. With the combination of Yao Seiko software, it can process components of any complex structure, and the processing time of one part is about 10-20 minutes.”

"Papapa..." Following Tang Shaohong's introduction, the audience applauded excitedly.

"Amazing! It's really printed!"

"Nano-level precision, how to do it!"

"As soon as this reprinting device comes out, the whole 3D printing industry will change!"

"Is this equipment expensive? How about the quality of the printed parts!"

"It can only be printed with nano metal particle materials. The price of this product is not cheap!"

"..."

While the audience applauded, there were endless discussions and speculations. The unique printing mode of this new 3D printer is eye-catching.

However, this new 3D printer uses specialized nano-metal materials, adopts a large number of advanced technologies, and has very innovative design ideas. It is definitely a heavyweight technology product, and the price is definitely not cheap.

The most important thing that restricts the promotion and use of high-tech products is often the price. They are very curious about the price of this new 3D printer.

"Thank you! Thank you for the applause!" Tang Shaohong put the model dog on top of the printer, smiled gratefully, and motioned to continue speaking.

Seeing this, the audience stopped applauding, looked at Tang Shaohong, and waited for her to speak.

Looking at the quiet scene, Tang Shaohong went on to introduce: "Everyone must be very curious to know the price of the polymer-nano 3D printer. Next, I will introduce it to you."

After speaking, Tang Shaohong turned sideways and looked at the big screen behind him.

The big screen changed to www.wuxiahere.com~ and displayed three types of printers: large, medium and small.

"Polymerization-nano 3D printer, there are three models, the specifications are: 75 cm type, 45 cm type, 15 cm type, their prices are: 30 million, 10 million, and 3 million, 75 The centimeter-type polymerized-nano 3D printer can print large-scale mechanical parts and construction machinery parts. The 45-centimeter type is generally used to print auto parts and medium-sized instrument parts. The 15-centimeter type is suitable for printing some small equipment and parts. "Tang Shaohong introduced with a smile.

After a pause, Tang Shao waved his hand again, and the big screen changed, revealing a large amount of nano-metal powder materials.

"The above are the nano-printing materials newly developed by our company, including: nano-scale titanium steel metal particles, nano-scale nickel-iron metal particles, nano-scale high-carbon titanium metal particles, ... The above twenty-four new nano-metal particle materials, It is specially used for polymerized-nano 3D printers, which can be configured to print many high-performance components." Tang Shaohong looked at the big screen and introduced them one by one with a smile.

Listening to Tang Shaohong's introduction, there was a sudden 'crashing' sound from the audience below the stage, causing chaos.

"So many new nanomaterials? True or false!"

"Xingyao Technology is not an Internet company? It also engages in industry!"

"Amazing! Shining Star Technology is preparing to show its strength in the field of 3D printing!"

"No wonder you dare to release this 3D printer. It turns out that nanomaterials are the focus!"

"..."

The auditorium under the booth was boiling again, and they were all shocked by the layout of Xingyao Technology in this field.

Looking at the excited audience under the stage, Tang Shaohong smiled happily. This is just the beginning, and the show is yet to come!